paper core cutting machine knife base adjustment. It could stop the cutting edge from shifting.
Put a wooden stick under the lower arm.
Then press the “down” button on the control panel. Keep pushing until the upper arm chuck height is the same as the lower one. Then stop.
Use a wrench to fix the screws on the arm surface.
Lock the screws on the back side of the arm.
Follow the above tips, and you will solve the problem perfectly. It is just one step of machine adjustment.
Servo encoder problem
Carbon fiber tube weights only 1/4-1/5 to steel.
When putting a paper tube onto the post, the air shaft is easy to handle.
Lower the injury risk when moving the rewinded paper roll from the machine to the ground.
Less wear and tear to bearing and other connected spare parts on the slitting machine.
Higher rotating speed when rewinding the paper.
the base silicone layer is cut off, but the adhesive layer stays in one piece so that people can peel the base paper freely after cutting it into big sheets in pallets.
Today, we will discuss sheeting blade (cross-cutting blade) grinding tips for automatic sheeting machines. First of all, please confirm the blade material with your machine
Dialysis paper is also called Glue coated Dialyzing paper. This paper is primarily used in medical sterilization. It is used to pack medical devices for sterilization. One side is high-density polyvinyl alcohol, and the other is dialysis paper. The advantage of dialysis paper is that it can enter and exit steam, but it is impermeable. When in use, the piece can be sealed with a sealing machine.
The base material in the video we call is a flexible magnet. The surface layer is photographic paper. The two types of material laminated together then become a new popular product-magnetic photographic paper.
How to slit muscle tape?
The most popular slot width is 38mm/50mm/75mm. The length is 5meter.
The slitting and rewinding machine needs many round blades for such a feature. And the device needs to have a meter counter function. When the target rewind meter reaches, the machine has to stop, and then the operator starts a new slitting and rewinding shift.
There is static after a prolonged storage time when sheeting plastic film, PVC/PP/PET laminated material, and foil laminated material. It causes the material feeding problem during