Today, we will discuss sheeting blade (cross-cutting blade) grinding tips for automatic sheeting machines. First of all, please confirm the blade material with your machine
How to slit muscle tape?
The most popular slot width is 38mm/50mm/75mm. The length is 5meter.
The slitting and rewinding machine needs many round blades for such a feature. And the device needs to have a meter counter function. When the target rewind meter reaches, the machine has to stop, and then the operator starts a new slitting and rewinding shift.
Top 4 problems during running thin food wrapping paper sheeter, wrinkle/curl/static/break…
Let’s know the differences of thermal paper mill and thermal paper processing factory today. Your will know what kind of machine to purchase after reading this blog.
Ways to avoid slitter rewind edge not even.
Buttons on control panel Operation process Inspection steps: Remark: machine operation side we mentioned above is the touch screen located side. The sensitive degree increases
You will know how to assemble and install the tag inserter device on a paper sheeter machine.
What’s the reasonable trim loss width?
For the slitting and rewinding machine, usually, the waste slit width is 8-20mm. If it is too narrow, it will be easy to tear down. If it is too broad, it will get stuck in the air tube.
It depends on the paper type. If the paper is very thick, it better reduces the trim loss width. Anyway, when the paper thickness is very thin and the stretch degree is very low. The trim edge width could increase a little. Typically more than 10mm.
For web guiding system, most often used is unwind guide. Let’s learn more about this system.
paper core cutting machine knife base adjustment. It could stop the cutting edge from shifting.
Put a wooden stick under the lower arm.
Then press the “down” button on the control panel. Keep pushing until the upper arm chuck height is the same as the lower one. Then stop.
Use a wrench to fix the screws on the arm surface.
Lock the screws on the back side of the arm.
Follow the above tips, and you will solve the problem perfectly. It is just one step of machine adjustment.
Servo encoder problem