![waste trim-suction fan](https://doinmc-machinery.com/wp-content/uploads/2023/01/waste-trim-300x175.png)
![Zoe Chen](https://doinmc-machinery.com/wp-content/uploads/2021/04/陈小明-个人照片-150x150.jpg)
What to do if Waste Edge Width is Narrow for Paper Slitter Machine-Trim Loss
What’s the reasonable trim loss width?
For the slitting and rewinding machine, usually, the waste slit width is 8-20mm. If it is too narrow, it will be easy to tear down. If it is too broad, it will get stuck in the air tube.
It depends on the paper type. If the paper is very thick, it better reduces the trim loss width. Anyway, when the paper thickness is very thin and the stretch degree is very low. The trim edge width could increase a little. Typically more than 10mm.