DOINMC BLOG

step chuck
FAQ
Zoe Chen

How to adjust the step chuck height on the shaftless loading stand?

Put a wooden stick under the lower arm.
Then press the “down” button on the control panel. Keep pushing until the upper arm chuck height is the same as the lower one. Then stop.
Use a wrench to fix the screws on the arm surface.
Lock the screws on the back side of the arm.
Follow the above tips, and you will solve the problem perfectly. It is just one step of machine adjustment.

Explore More
PRODUCT TUTORIAL
Zoe Chen

Why Use Carbon Fiber Air Shaft on Paper Slitter and Rewinder Machine?

Carbon fiber tube weights only 1/4-1/5 to steel.
When putting a paper tube onto the post, the air shaft is easy to handle.
Lower the injury risk when moving the rewinded paper roll from the machine to the ground.
Less wear and tear to bearing and other connected spare parts on the slitting machine.
Higher rotating speed when rewinding the paper.

Explore More
PURCHASE GUIDE
Zoe Chen

Slitter and Rewinder for Medical Dialyzing Paper Industry

Dialysis paper is also called Glue coated Dialyzing paper. This paper is primarily used in medical sterilization. It is used to pack medical devices for sterilization. One side is high-density polyvinyl alcohol, and the other is dialysis paper. The advantage of dialysis paper is that it can enter and exit steam, but it is impermeable. When in use, the piece can be sealed with a sealing machine.

Explore More
FAQ
Zoe Chen

How to cut magnetic photo paper roll?

The base material in the video we call is a flexible magnet. The surface layer is photographic paper. The two types of material laminated together then become a new popular product-magnetic photographic paper.

Explore More
PRODUCT TUTORIAL
Zoe Chen

Sports Muscle Tape (KT tape) Slitting and Rewinding Machine

How to slit muscle tape?
The most popular slot width is 38mm/50mm/75mm. The length is 5meter.
The slitting and rewinding machine needs many round blades for such a feature. And the device needs to have a meter counter function. When the target rewind meter reaches, the machine has to stop, and then the operator starts a new slitting and rewinding shift.

Explore More